Development
ULN2003A Driver Module Stepper Motor Driver Board
SKU : EL255110
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹74.00
CompareBased on 0 reviews
Be the first to review “ULN2003A Driver Module Stepper Motor Driver Board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK037 -
-
Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
Mounting Solder-able pins for direct attachment to the LCD module Supply Voltage (VCC) 5V I2C Address Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) Compatible Displays Works with standard HD44780 controllers (16×2 or 20×4 LCDs) Current Consumption Approximately 20mA (varies based on LCD backlight usage) Chip Used PCF8574T or PCF8574AT Clock Speed Up to 100kHz (standard I2C protocol) Potentiometer Built-in for contrast adjustment Interface Type I2C (Inter-Integrated Circuit) SKU: EK048 -
Development
4×4 Key Matrix Membrane Keypad
SKU : EL255035
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any micro-controller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 5 DC
SKU: EK015 -
Development
3 Wire Voltmeter 0.36 Inch 4.5V-30V DC Digital Voltmeter Module Board
Product Details:
Display Type Three 0.36 inch LED digital tube Display color Red / Green / Blue Accuracy 1%(+/- 1 Digit) Measuring Range DC0-30V Refresh rate about 200mS / times Power Supply voltage DC 4.5-30V Operating temperature -10 ~ +80 degree This voltmeter uses 0.36 inch LED digital tube without casing. The voltmeter is super thin with small shape and low price and stable performances. It can display well. This voltmeter’s measurement range is wide, it’s DC0-100V. It need outer working power supply and the voltage is DC4.5-30V. There is protection when the wires aren’t correctly connected. This voltmeter’s display resolution is 0.1V.
SKU: EK011
There are no reviews yet.