Development
ULN2003A Driver Module Stepper Motor Driver Board
SKU : EL255110
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹74.00
CompareBased on 0 reviews
Be the first to review “ULN2003A Driver Module Stepper Motor Driver Board”
Related products
-
Development
3 Wire Voltmeter 0.36 Inch 4.5V-30V DC Digital Voltmeter Module Board
Product Details:
Display Type Three 0.36 inch LED digital tube Display color Red / Green / Blue Accuracy 1%(+/- 1 Digit) Measuring Range DC0-30V Refresh rate about 200mS / times Power Supply voltage DC 4.5-30V Operating temperature -10 ~ +80 degree This voltmeter uses 0.36 inch LED digital tube without casing. The voltmeter is super thin with small shape and low price and stable performances. It can display well. This voltmeter’s measurement range is wide, it’s DC0-100V. It need outer working power supply and the voltage is DC4.5-30V. There is protection when the wires aren’t correctly connected. This voltmeter’s display resolution is 0.1V.
SKU: DM04 -
Development
LCD 16×2 Alphanumeric Display Blue
SKU : EL255021
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EK255021 -
Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
Mounting Solder-able pins for direct attachment to the LCD module Supply Voltage (VCC) 5V I2C Address Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) Compatible Displays Works with standard HD44780 controllers (16×2 or 20×4 LCDs) Current Consumption Approximately 20mA (varies based on LCD backlight usage) Chip Used PCF8574T or PCF8574AT Clock Speed Up to 100kHz (standard I2C protocol) Potentiometer Built-in for contrast adjustment Interface Type I2C (Inter-Integrated Circuit) SKU: EK255017 -
Development, Motors | Drivers | Pumps
12V-40V 10A DC Motor PWM Speed Control Board Module
SKU : EK255010
Input supply voltage: DC 12V-40V
The maximum output power: 400W
The maximum continuous output current:8A
Static Current:0.02 A ( Standby )
PWM frequency: 13kHz
Duty Cycle adjustable: 10%-100%SKU: EK255010 -
Arduino | IOT | WiFi Boards & Shields, Development
L293D Motor Driver Shield for Arduino
SKU : EK255048
Model Type: Servo Shield Compatibility: Arduino Logic control voltage Vss 4.5~5.5V Dimensions (L x W x H) mm 70x54x18 Weight (g): 35 Shipping Weight 0.037 kg Shipping Dimensions 8 × 6 × 3 cm SKU: EK255048
There are no reviews yet.