Development
ULN2003A Driver Module Stepper Motor Driver Board
SKU : EL255110
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹74.00
CompareBased on 0 reviews
Be the first to review “ULN2003A Driver Module Stepper Motor Driver Board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014 -
-
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EKD008 -
Development
LCD 16×2 Alphanumeric Display Green
SKU : EL255020
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EK255020 -
Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
Mounting Solder-able pins for direct attachment to the LCD module Supply Voltage (VCC) 5V I2C Address Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) Compatible Displays Works with standard HD44780 controllers (16×2 or 20×4 LCDs) Current Consumption Approximately 20mA (varies based on LCD backlight usage) Chip Used PCF8574T or PCF8574AT Clock Speed Up to 100kHz (standard I2C protocol) Potentiometer Built-in for contrast adjustment Interface Type I2C (Inter-Integrated Circuit) SKU: EK255017
There are no reviews yet.