Development
ULN2003A Driver Module Stepper Motor Driver Board
SKU : EL255110
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹74.00
CompareBased on 0 reviews
Be the first to review “ULN2003A Driver Module Stepper Motor Driver Board”
Related products
-
Development
PS2 Joystick Breakout Sensor Module by Elektrokart
SKU : EK255003
- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: EK088 -
Development
LCD 16×2 Display Module Blue with I2C Interface
SKU : EL255022
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wiring
- 16 characters wide, 2 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Interface: I2C
- Interface Address: 0x27
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V
SKU: EK057 -
Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
Mounting Solder-able pins for direct attachment to the LCD module Supply Voltage (VCC) 5V I2C Address Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) Compatible Displays Works with standard HD44780 controllers (16×2 or 20×4 LCDs) Current Consumption Approximately 20mA (varies based on LCD backlight usage) Chip Used PCF8574T or PCF8574AT Clock Speed Up to 100kHz (standard I2C protocol) Potentiometer Built-in for contrast adjustment Interface Type I2C (Inter-Integrated Circuit) SKU: EK048 -
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EK029
There are no reviews yet.