- Control Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
- Microcontroller Compatibility: Works directly with Arduino without extra drivers.
Arduino | IOT | WiFi Boards & Shields, Development
L293D Motor Driver Shield for Arduino
SKU : EK255048
| Model Type: | Servo Shield |
|---|---|
| Compatibility: | Arduino |
| Logic control voltage Vss | 4.5~5.5V |
| Dimensions (L x W x H) mm | 70x54x18 |
| Weight (g): | 35 |
| Shipping Weight | 0.037 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
₹174.00
Compare- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chip-set provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (uni-polar or bipolar) with single coil, double coil, or interleaved stepping.
Based on 0 reviews
Be the first to review “L293D Motor Driver Shield for Arduino”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
Arduino UNO Prototype Shield With Breadboard
SKU: EKD005
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: EK255005 -
Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
Mounting Solder-able pins for direct attachment to the LCD module Supply Voltage (VCC) 5V I2C Address Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) Compatible Displays Works with standard HD44780 controllers (16×2 or 20×4 LCDs) Current Consumption Approximately 20mA (varies based on LCD backlight usage) Chip Used PCF8574T or PCF8574AT Clock Speed Up to 100kHz (standard I2C protocol) Potentiometer Built-in for contrast adjustment Interface Type I2C (Inter-Integrated Circuit) SKU: EK255017 -
Development, Relays & Switches
1 Channel 5V Relay Module
SKU: EK255063
SKU: EK255063 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014
There are no reviews yet.