IR Sensor Module Board


Interface (3-wires):-

  • VCC external 3.3V-5V voltage (can be directly connected with the a 5v micro-controller and 3.3v micro-controller).
  • GND external GND.
  • OUT board digital output interface (0 and 1).

30.00

Compare

IR Sensor module has great adaptive capability of the ambient light, having a pair of infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the green LED lights up, while the signal output will output digital signal (a low-level signal), through the potentiometer knob to adjust the detection distance, the effective distance range 2 ~ 10cm working voltage of 3.3V-5V. The detection range of the sensor can be adjusted by the potentiometer , with little interference, easy to assemble, easy to use features, can be widely used robot obstacle avoidance, obstacle avoidance car assembly line count and black-and-white line tracking and many other occasions.

 

Features of IR Sensor Module:-

  • When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
  • the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
  • The sensor module output port OUT can be directly connected with the micro-controller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC ; GND-GND ; OUT-IO.
  • The comparator using LM393, stable.
  • 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
  • With the screw holes of 3mm, easy to install.
  • Board size: 3.1CM * 1.5CM.
  • Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “IR Sensor Module Board”

There are no reviews yet.

Select at least 2 products
to compare