Development
I2C Module for 16×2 (1602) Character LCD
SKU : EL255017
Product Details:
| Mounting | Solder-able pins for direct attachment to the LCD module |
| Supply Voltage (VCC) | 5V |
| I2C Address | Default: 0x27 (adjustable to 0x20-0x27 with solder jumpers on the PCB) |
| Compatible Displays | Works with standard HD44780 controllers (16×2 or 20×4 LCDs) |
| Current Consumption | Approximately 20mA (varies based on LCD backlight usage) |
| Chip Used | PCF8574T or PCF8574AT |
| Clock Speed | Up to 100kHz (standard I2C protocol) |
| Potentiometer | Built-in for contrast adjustment |
| Interface Type | I2C (Inter-Integrated Circuit) |
₹99.00
CompareFeatures:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Based on 0 reviews
Be the first to review “I2C Module for 16×2 (1602) Character LCD”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
SKU : Ek255013
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013 -
Development
LCD 16×2 Alphanumeric Display Blue
SKU : EL255021
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EK255021 -
-
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EKD008
There are no reviews yet.