- Control Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
- Microcontroller Compatibility: Works directly with Arduino without extra drivers.
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹174.00
Compare| Model Type: | Expansion Shield |
|---|---|
| Width (mm): | 52 |
| Height (mm): | 18 |
| Weight (g): | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 8 × 7 × 3 cm |
Based on 0 reviews
Be the first to review “CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Educational
Arduino Uno R3 CH340G ATmega328p Development Board with Micro USB
Arduino | IOT | WiFi Boards & Shields, EducationalArduino Uno R3 CH340G ATmega328p Development Board with Micro USB
SKU: EK255
- Micro-controller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Arduino | IOT | WiFi Boards & Shields, Development
Arduino UNO Prototype Shield With Breadboard
SKU: EKD005
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: EK255005 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014 -
Development
LCD 16×2 Alphanumeric Display Green
SKU : EL255020
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EK255020 -
Development, Relays & Switches
1 Channel 5V Relay Module
SKU: EK255063
SKU: EK255063
There are no reviews yet.