Arduino | IOT | WiFi Boards & Shields, Educational
Arduino UNO R3 CH340G ATmega328p Development Board
SKU: EK255
- Micro-controller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
₹299.00
ComparePackage Includes :
1 x Arduino UNO R3 CH340G ATmega328p Development Board – Compatible with Arduino
1 x set of male Jumper Header.
Based on 0 reviews
Be the first to review “Arduino UNO R3 CH340G ATmega328p Development Board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
L293D Motor Driver Shield for Arduino
SKU : EK255048
Model Type: Servo Shield Compatibility: Arduino Logic control voltage Vss 4.5~5.5V Dimensions (L x W x H) mm 70x54x18 Weight (g): 35 Shipping Weight 0.037 kg Shipping Dimensions 8 × 6 × 3 cm SKU: EK056 -
Development, Educational, Sensors
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
SKU : EK255
- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: EK093 -
Arduino | IOT | WiFi Boards & Shields, Development
Arduino UNO Prototype Shield With Breadboard
SKU: EKD005
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: EK023 -
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar Products
BLE Plug-In Boards
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar ProductsBLE Plug-In Boards
SKU : Ek255219
- Fully BLE 5.3 compliant.
- Compliant for certifications : EN 300 328, FCC CFR47 Part 15, ARIB STD-T66.
- Support for energy meter handshaking, over-the-air upgrade (OTA).
- Serial Wire Debug (SWD), sleep mode.
- AES 128-bit cryptographic accelerator.
- Cellular to BLE fallback option for metering SLA’s.
- Model No : OES8800-01.0
SKU: EK027 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
SKU : Ek255013
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK038
There are no reviews yet.