Arduino | IOT | WiFi Boards & Shields, Educational
Arduino UNO R3 CH340G ATmega328p Development Board
SKU: EK255
- Micro-controller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
₹299.00
ComparePackage Includes :
1 x Arduino UNO R3 CH340G ATmega328p Development Board – Compatible with Arduino
1 x set of male Jumper Header.
Based on 0 reviews
Be the first to review “Arduino UNO R3 CH340G ATmega328p Development Board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
SKU : Ek255013
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013 -
Arduino | IOT | WiFi Boards & Shields, Educational
Arduino Uno R3 CH340G ATmega328p Development Board with Micro USB
Arduino | IOT | WiFi Boards & Shields, EducationalArduino Uno R3 CH340G ATmega328p Development Board with Micro USB
SKU: EK255
- Micro-controller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
-
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EKD008 -
Arduino | IOT | WiFi Boards & Shields, Development
L293D Motor Driver Shield for Arduino
SKU : EK255048
Model Type: Servo Shield Compatibility: Arduino Logic control voltage Vss 4.5~5.5V Dimensions (L x W x H) mm 70x54x18 Weight (g): 35 Shipping Weight 0.037 kg Shipping Dimensions 8 × 6 × 3 cm SKU: EK255048
There are no reviews yet.