Arduino | IOT | WiFi Boards & Shields, Educational
Arduino UNO R3 CH340G ATmega328p Development Board
SKU: EK255
- Micro-controller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
₹299.00
ComparePackage Includes :
1 x Arduino UNO R3 CH340G ATmega328p Development Board – Compatible with Arduino
1 x set of male Jumper Header.
Based on 0 reviews
Be the first to review “Arduino UNO R3 CH340G ATmega328p Development Board”
Related products
-
Arduino | IOT | WiFi Boards & Shields, Development
Multi function Shield For Arduino UNO
SKU : EK255143
- 10K adjustable precision potentiometer.
- 3 x Independent push buttons.
- Piezo buzzer.
- DS18B20 temperature sensor interface.
- LM35 temperature sensor interface.
- Infrared receiver interface.
SKU: EK255143 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 V3 Lua Node MCU CH340 Wifi Dev. Board
SKU : EK255
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013-1 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014 -
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar Products
BLE Plug-In Boards
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar ProductsBLE Plug-In Boards
SKU : Ek255219
- Fully BLE 5.3 compliant.
- Compliant for certifications : EN 300 328, FCC CFR47 Part 15, ARIB STD-T66.
- Support for energy meter handshaking, over-the-air upgrade (OTA).
- Serial Wire Debug (SWD), sleep mode.
- AES 128-bit cryptographic accelerator.
- Cellular to BLE fallback option for metering SLA’s.
- Model No : OES8800-01.0
SKU: EK255219 -
Arduino | IOT | WiFi Boards & Shields, Development
Arduino UNO Prototype Shield With Breadboard
SKU: EKD005
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: EK255005
There are no reviews yet.