- Control Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
- Microcontroller Compatibility: Works directly with Arduino without extra drivers.
Development
11.1-12.6V 3S Lithium Battery Capacity Indicator
These modules provide a quick visual reference of the charge status (capacity) of 18650 Lithium-ion batteries, as well as other lithium batteries with a maximum voltage of 3.7volts per cell.
This battery capacity display module is perfect for DIY power supplies, battery chargers, RC and electric vehicles, to provide quick and easy-to-read voltage status of the battery.
Simply connect the module to the positive and negative connections of your battery or battery pack, and the charge status of the battery is displayed in real-time using a visual bar display.
The display outline color is red, and the display bars are blue.
Package Includes:
1 x 11.1-12.6V 3S Lithium Battery Capacity Indicator.
₹125.00
CompareRelated products
-
Development, Development Boards, Soldering Products
400 Points Solderless Breadboard
0 out of 5(0)SKU : 255002
- 400 points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
SKU: EK255002 -
Arduino | IOT | WiFi Boards & Shields, Development
Arduino UNO Prototype Shield With Breadboard
0 out of 5(0)SKU: EKD005
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: EK255005 -
Development
LCD 16×2 Alphanumeric Display Blue
0 out of 5(0)SKU : EL255021
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EK255021 -
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
0 out of 5(0)SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EKD008





There are no reviews yet.