Sensors
Showing 1–20 of 53 results
-
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar Panels
BLE Plug-In Boards
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar PanelsBLE Plug-In Boards
SKU : Ek255219
- Fully BLE 5.3 compliant.
- Compliant for certifications : EN 300 328, FCC CFR47 Part 15, ARIB STD-T66.
- Support for energy meter handshaking, over-the-air upgrade (OTA).
- Serial Wire Debug (SWD), sleep mode.
- AES 128-bit cryptographic accelerator.
- Cellular to BLE fallback option for metering SLA’s.
- Model No : OES8800-01.0
SKU: EK255219 -
-
Sensors
HC-SR04 Ultrasonic Distance Sensor Module
SKU : 255044
- Working Voltage:5V (DC)
- Static Current: Less than 2mA
- Output Signal:5V
- Sensor Angle: Less than 15 Degrees
- Detection Distance: 2 cm to 450 cm
- High Precision: Up to 2 mm
- Input Trigger Signal: 10µs TTL impulse
- Echo Signal: Output TTL PWL Signal
- High sensitivity ultrasonic range sensor
- Works with Arduino board
SKU: EK255044 -
-
Sensors
PIR Motion Detector Sensor Module HC-SR501
SKU : EK255012
The Passive Infrared Sensor ( PIR ) sensor module is used for motion detection. It is often referred to used “ PIR ”, “Pyro electric”, “Passive Infrared” and “IR Motion” sensor. The module has an on-board pyro electric sensor, conditioning circuitry and a dome shaped Fresnel lens. It is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems.
SKU: EK255012 -
-
-
Development, Electronic Components, Relays & Switches, Sensors
5-36V Switch Drive High-power Mosfet Trigger Module
Development, Electronic Components, Relays & Switches, Sensors5-36V Switch Drive High-power Mosfet Trigger Module
SKU: EK255
- This 5V-36V Switch Drive High-power Mosfet Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, PWM, motor speed control, lamp brightness. etc.
SKU: EK255063-1 -
Led's & Lights, Power Led's, Sensors
650nm 6mm 5V DC Mini Laser Light Module
SKU: EK255
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
SKU: EK255063-1-1 -
Sensors
TCS3200 Color Recognition Sensor Module for Arduino
SKU: EKD007
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a micro-controller.
- Low-profile surface mount package.
SKU: EK255007 -
-
-
-
Sensors
TTP223 1-Channel Capacitive Touch Sensor Module
SKU: EK255055
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @ VDD =3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled.
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
SKU: EK255055
