- Quantity of product Master Volume Control Blank Pcb can not be less than 5
- Total cost of products in cart must be ₹500.00 or more
Development
Showing 41–54 of 54 results
-
Development, Educational, Sensors
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
SKU : EK255
- Voltage:Â DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: 5487FB8/38-1-1-1-1-2 -
Batteries & Chargers, Development
120W 12-32V to 35-60V 6A DC-DC Boost Converter Module
SKU : EK
- Input voltage :12-32V
- Output voltage:35-60V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
Free Delivery above Rs.999/- SKU: EK255-2 -
Batteries & Chargers, Development, Development Boards, Power Supply Boards, Transistor and IC
AMS1117 5V Step-Down Power Supply Module
Batteries & Chargers, Development, Development Boards, Power Supply Boards, Transistor and ICAMS1117 5V Step-Down Power Supply Module
SKU: EK255094
- Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
Free Delivery above Rs.600/-
SKU: EK255094 -
Development, Driver Boards
Gain Amplification Module Operational Amplifier Module
SKU: EK255084
- LM358 chip onboard.
- 100 gain of the circuit design.
- 10K onboard adjustable resistance, you can adjust the magnification.
- Onboard power indicator.
- The chip has led major pin can be directly input and output signals.
SKU: EK255084 -
-
Development
IRF520 Mosfet Driver Module Board
SKU : EK255109
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
SKU: EK255109 -
Development, Motors | Drivers | Pumps
L298N Based Dual DC Motor Driver Module with PWM Control
SKU: EK255078
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
Free Delivery above Rs.600/-
SKU: EK255078 -
Development
LM2577 DC-DC Step-Up Converter Module XL6009
SKU: EK255086
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
SKU: EK255086 -
Batteries & Chargers, Development
Real Time Clock DS1307 RTC I2C Module AT24C32 with Battery
SKU: EK255
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
Free Delivery above Rs.600/-
SKU: EK255-1 -
Audio Amplifier Board, Development
TDA2030A 6-12V 18W Audio Amplifier Module
SKU: EK255082
- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
SKU: EK255082 -
Batteries & Chargers, Development
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
Batteries & Chargers, DevelopmentTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
SKU: Ek255
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
Free Delivery above Rs.600/-
SKU: EK255 -
-