- High quality Module.
- 1-Channel Relay interface board
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
Development
Showing 1–20 of 61 results
-
-
Development, Sensors
NEO-6M GPS Module with EPROM
SKU: EK
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: n/a -
Development
Robot Smart Car Chassis Kit
SKU : EK255
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia x H).
SKU: n/a -
Development, Tools and Hardware
Scale for Electronic Engineers
SKU : EK255
- Measuring length: 15 cm(Â 6 inches)
- Commonly used IC package: 1.SSOP16, 2.QFN32, 3.SOP16, 5.QFP32 4.TSSOP28
- Common hole diameter reference size (MIL) for hanging a slot
- 28 to 8 AWG hole on Scale
- Multipurpose ruler Scale
- Gold plated Drawing
- Hard PCB material
SKU: n/a -
Development, Motors | Drivers | Pumps
12V-40V 10A DC Motor PWM Speed Control Board Module
SKU : EK255010
Input supply voltage: DC 12V-40V
The maximum output power: 400W
The maximum continuous output current:8A
Static Current:0.02 A ( Standby )
PWM frequency: 13kHz
Duty Cycle adjustable: 10%-100%SKU: EK255010 -
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar Products
BLE Plug-In Boards
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar ProductsBLE Plug-In Boards
SKU : Ek255219
- Fully BLE 5.3 compliant.
- Compliant for certifications : EN 300 328, FCC CFR47 Part 15, ARIB STD-T66.
- Support for energy meter handshaking, over-the-air upgrade (OTA).
- Serial Wire Debug (SWD), sleep mode.
- AES 128-bit cryptographic accelerator.
- Cellular to BLE fallback option for metering SLA’s.
- Model No : OES8800-01.0
SKU: EK255219 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
SKU : Ek255013
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 V3 Lua Node MCU CH340 Wifi Dev. Board
SKU : EK255
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013-1 -
-
-
Development
1 Channel 5V Relay Module
SKU: EK255063
- Control Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
- Microcontroller Compatibility: Works directly with Arduino without extra drivers.
SKU: EK255063 -
Development
1×4 Key Matrix Membrane Keypad
SKU : EL255034
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any micro-controller
- Mount Style: Self-Adherence
- Max. Circuit Rating: 35 V DC , 100 mA.
- Contact Bounce : <=5ms
- Life Expectancy : 1 million closures
- Operation Temperature : -20 to +40 °C
SKU: EK255034 -
Development, Development Boards, General Pcb's, Pcb Boards
170 Points Mini Breadboard SYB-170
SKU : EK255108
- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
SKU: EK255108
