- High quality Module.
- 1-Channel Relay interface board
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
Development
Showing 1–20 of 57 results
-
-
Development, Sensors
NEO-6M GPS Module with EPROM
SKU: EK
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: n/a -
Development, Development Boards, General Pcb's, Pcb Boards, Tools and Hardware
Scale for Electronic Engineers
Development, Development Boards, General Pcb's, Pcb Boards, Tools and HardwareScale for Electronic Engineers
SKU : EK255
- Measuring length: 15 cm(Â 6 inches)
- Commonly used IC package: 1.SSOP16, 2.QFN32, 3.SOP16, 5.QFP32 4.TSSOP28
- Common hole diameter reference size (MIL) for hanging a slot
- 28 to 8 AWG hole on Scale
- Multipurpose ruler Scale
- Gold plated Drawing
- Hard PCB material
SKU: n/a -
Development, Motors | Drivers | Pumps
12V-40V 10A DC Motor PWM Speed Control Board Module
SKU : EK255010
Input supply voltage: DC 12V-40V
The maximum output power: 400W
The maximum continuous output current:8A
Static Current:0.02 A ( Standby )
PWM frequency: 13kHz
Duty Cycle adjustable: 10%-100%SKU: EK255010 -
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar Panels
BLE Plug-In Boards
Arduino | IOT | WiFi Boards & Shields, Development, Development Boards, Sensors, Solar PanelsBLE Plug-In Boards
SKU : Ek255219
- Fully BLE 5.3 compliant.
- Compliant for certifications : EN 300 328, FCC CFR47 Part 15, ARIB STD-T66.
- Support for energy meter handshaking, over-the-air upgrade (OTA).
- Serial Wire Debug (SWD), sleep mode.
- AES 128-bit cryptographic accelerator.
- Cellular to BLE fallback option for metering SLA’s.
- Model No : OES8800-01.0
SKU: EK255219 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP32 WROOM Development Board with Wifi and Bluetooth 30 PIN
SKU : Ek255016
- Model: ESP WROOM 32 MCU
- Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
- Operating voltage (v): 2.3 ~ 3.6
- Operating current (mA): 80
- Small volume, easily embedded to other products
- Strong function with support LWIP Protocol, Freertos
SKU: EK255014 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
Arduino | IOT | WiFi Boards & Shields, DevelopmentESP8266 NodeMCU V3 Lua CH340 Wifi Development Board
SKU : Ek255013
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013 -
Arduino | IOT | WiFi Boards & Shields, Development
ESP8266 V3 Lua Node MCU CH340 Wifi Dev. Board
SKU : EK255
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
SKU: EK255013-1 -
-
Development
1×4 Key Matrix Membrane Keypad
SKU : EL255034
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any micro-controller
- Mount Style: Self-Adherence
- Max. Circuit Rating: 35 V DC , 100 mA.
- Contact Bounce : <=5ms
- Life Expectancy : 1 million closures
- Operation Temperature : -20 to +40 °C
SKU: EK255034 -
Development, Development Boards, General Pcb's, Pcb Boards, Soldering Products
170 Points Mini Breadboard SYB-170
Development, Development Boards, General Pcb's, Pcb Boards, Soldering Products170 Points Mini Breadboard SYB-170
SKU : EK255108
- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
SKU: EK255108 -
Development, Relays & Switches
2 Channel 5V Relay Module with Optocoupler
SKU: EK255006
- The module using Single relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
SKU: EK255006 -
Development
3 Wire Voltmeter 0.36 Inch 4.5V-30V DC Digital Voltmeter Module Board
Product Details:
Display Type Three 0.36 inch LED digital tube Display color Red / Green / Blue Accuracy 1%(+/- 1 Digit) Measuring Range DC0-30V Refresh rate about 200mS / times Power Supply voltage DC 4.5-30V Operating temperature -10 ~ +80 degree This voltmeter uses 0.36 inch LED digital tube without casing. The voltmeter is super thin with small shape and low price and stable performances. It can display well. This voltmeter’s measurement range is wide, it’s DC0-100V. It need outer working power supply and the voltage is DC4.5-30V. There is protection when the wires aren’t correctly connected. This voltmeter’s display resolution is 0.1V.
SKU: DM04 -
Batteries & Chargers, Development, Development Boards, Power Supply Boards
3.3V 5V Power Supply Module MB102 Breadboard
Batteries & Chargers, Development, Development Boards, Power Supply Boards3.3V 5V Power Supply Module MB102 Breadboard
SKU: EK255051
- Breadboard power supply module, compatible with 5V, 3.3V with Breadboard.
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: EK255052 -
-
Development
4×4 Key Matrix Membrane Keypad
SKU : EL255035
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any micro-controller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 5 DC
SKU: EK255035
USB Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B)
White Type C cable – 1m for Arduino
Robot Smart Car Chassis Kit
DC 12V Optical 3 LED Diffused Module Light - Set of 6 Pcs
SMA Female Connector Right Angled Through hole for PCB Mount
1 Channel 5V Relay Module 







