- Control Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
- Microcontroller Compatibility: Works directly with Arduino without extra drivers.
Development
LM2596 DC-DC Adjustable Step Down Power Supply Module
SKU: EK255062
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
₹59.00
CompareFeatures:
- Input voltage : 3-40V
- Output voltage : 1.5-35V(Adjustable)
- Output current : Rated current is 2A, maximum 3A(Additional heatsink is required)
- Module Properties : non-isolated constant voltage module
- Rectification : non-synchronous rectification
- Short circuit protection : current limiting, since the recovery
Package Includes:
1 x LM2596S DC-DC Buck Converter Power Supply
Based on 0 reviews
Be the first to review “LM2596 DC-DC Adjustable Step Down Power Supply Module”
Related products
-
-
Development, Relays & Switches
1 Channel 5V Relay Module
SKU: EK255063
SKU: EK255063 -
Arduino | IOT | WiFi Boards & Shields, Development
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino | IOT | WiFi Boards & Shields, DevelopmentCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
SKU : EKD008
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: EKD008 -
Arduino | IOT | WiFi Boards & Shields, Development
L293D Motor Driver Shield for Arduino
SKU : EK255048
Model Type: Servo Shield Compatibility: Arduino Logic control voltage Vss 4.5~5.5V Dimensions (L x W x H) mm 70x54x18 Weight (g): 35 Shipping Weight 0.037 kg Shipping Dimensions 8 × 6 × 3 cm SKU: EK255048 -
There are no reviews yet.